Cyclone Images

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
cdmodelz
CNC Apprentice
CNC Apprentice
Posts: 35
Joined: Mon 22 Nov , 2010 16:38 pm

Cyclone Images

Post by cdmodelz » Thu 02 Aug , 2012 21:32 pm

Hi. I would appreciate if anyone could post some images of the Cyclone as I intend to get one in Sept. I am changing from a Boxford 240.
Top
User avatar
Denford Admin
Site Admin
Posts: 3636
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Cyclone Images

Post by Denford Admin » Fri 03 Aug , 2012 11:03 am

I don't have any really good quality ones.
The announcment bit at the top of the Cylone section has photos and I've just added some product literature .pdfs
viewforum.php?f=33
Top
Post Reply

Return to “Cyclone”