Workpiece offset/datum

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Andy Cave
Posts: 3
Joined: Mon 31 Mar , 2008 9:50 am

Workpiece offset/datum

Post by Andy Cave » Tue 10 May , 2011 14:25 pm

Please could I have the details for workpice offsets/datum setting for a Cyclone. Machine only no VR etc.

Cheers

Andy
Top
Martin
CNC Guru
CNC Guru
Posts: 1901
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Workpiece offset/datum

Post by Martin » Tue 10 May , 2011 18:43 pm

HI Andy,
What Control/Software does you're Cyclone have?
Top
Andy Cave
Posts: 3
Joined: Mon 31 Mar , 2008 9:50 am

Re: Workpiece offset/datum

Post by Andy Cave » Wed 11 May , 2011 10:51 am

Hi,

Fanuc 21i.
Top
User avatar
Denford Admin
Site Admin
Posts: 3636
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Workpiece offset/datum

Post by Denford Admin » Fri 13 May , 2011 12:17 pm

It's all explained in here:
viewtopic.php?f=33&t=3327
Top
Post Reply

Return to “Cyclone”