compact 10000
Moderators: Martin, Steve, Mr Magoo
-
- CNC Expert
- Posts: 101
- Joined: Wed 20 Mar , 2013 22:34 pm
- Hardware/Software: Denford Triac PNC3
FeatureCam - CADCAM
Delcam Powershape
compact 10000
Hi all, some advice plz, currently own a triac but am looking for some thing quicker to aid my production of parts made from Prolab model board, the compact 1000, seems to be a likely contender, obv there is one available on a national auction site, but has not pc to run it, would a standard 32bit w7 pc be suffucient to run , also is connection from pc to machine via a USB cable or r232 cable.
Re: compact 10000
It will be USB.
VRMilling version 5 will run from windows 7. It would be best to update to version 5.54 off the Denford website but you would need the correct licence disc.
VRMilling version 5 will run from windows 7. It would be best to update to version 5.54 off the Denford website but you would need the correct licence disc.
-
- CNC Expert
- Posts: 101
- Joined: Wed 20 Mar , 2013 22:34 pm
- Hardware/Software: Denford Triac PNC3
FeatureCam - CADCAM
Delcam Powershape
Re: compact 10000
Ah great thankyou.