Compact 1000 Pro

All info relating to the Denford Compact 1000 and Compact 1000 Pro small routing machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
dencad
Posts: 1
Joined: Fri 09 Mar , 2012 19:33 pm
Hardware/Software: Compact 1000 Pro
QuickCAM Pro 1-11
VR CNC Milling 5-43

Compact 1000 Pro

Post by dencad » Mon 12 Mar , 2012 14:52 pm

I have a brand new Compact 1000 Pro running VR CNC Milling 5 (5-43). My first attempt to machine an F1 car resulted in an error message of "error code 1227". After rebooting everything I was able to get to the "homing" routine after which it timed out within 5 seconds. I tried a new USB cable, replacing the one that came with the machine and was able to machine one side of the F1 block. When I flipped the block and started to run the other side I received a "timeout on ICM (host TX)" message and the "error code 1227" message. I switched the USB to another port, made sure no power saver settings were on, no screen saver active, rebooted the machine and the computer. Same error messages.

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Compact 1000 Pro

Post by Denford Admin » Mon 12 Mar , 2012 17:08 pm

Are you able to try the machine with another PC? Just so we can rule out one or the other.

Post Reply