Burning smell from R-Type Block

All info relating to the Denford Compact 1000 and Compact 1000 Pro small routing machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
davidfhu
Posts: 33
Joined: Fri 23 Oct , 2009 15:27 pm

Burning smell from R-Type Block

Post by davidfhu » Mon 23 Aug , 2010 16:34 pm

Hi,

Can anyone explain how come I see smoke from my R-Type Block?

I am using 4 flutes ball nose milling bit at stepover 15% with 23000rpm. What is wrong? With 2 flutes, it is fine.
Best regards,

David Fhu

“Dream as if you'll live forever, live as if you'll die today.” - James Dean

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Burning smell from R-Type Block

Post by Denford Admin » Tue 24 Aug , 2010 10:07 am

The machine is not moving quickly enough so the cutting flutes are mostly rubbing against the wood instead of cutting it - causing it to smoke
Either:
Decrease the spindle speed RPM
or
Increase the axis feed (mm/min)

davidfhu
Posts: 33
Joined: Fri 23 Oct , 2009 15:27 pm

Re: Burning smell from R-Type Block

Post by davidfhu » Wed 06 Oct , 2010 2:17 am

Thank you.
Best regards,

David Fhu

“Dream as if you'll live forever, live as if you'll die today.” - James Dean

Post Reply