PCB Engraver control software v1.3 released 1st July 2009

Anything to do with our PCB / Engraving machine or software

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3600
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

PCB Engraver control software v1.3 released 1st July 2009

Post by Denford Admin » Wed 01 Jul , 2009 11:15 am

this version includes updates to:
fixes to stop machine properly if guard opened, and not allow cycle to start with door open etc etc
change group tools option into one (big program) so that it doesn't output G28 goto tc pos if tool number doesn't change between CNC programs

Check here to find and download the latest version:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply