2D Design Version 2 will not open certain files.

A forum for issues relating to the use of TechSoft 2D design and Denford CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
trouty53
Posts: 2
Joined: Wed 14 Jul , 2010 11:06 am
Hardware/Software: Microrouter + VRMilling v2
Techsoft 2D ver 1
ProDesktop

2D Design Version 2 will not open certain files.

Post by trouty53 » Mon 12 Dec , 2011 16:52 pm

Hi i'm having probolems open up ceratin files that have been created by pupils on the the latest version of 2D deisgn but when i try and put them all together to collate them so they can be cut on the laser cutter i get this error message. They are all using 2d Design V2 2.09. I havent managed to see if io can pin it down to individual machines to see if thats the issue but at present it just seems to be random machines that for some reason causes problems.

The error message is:

"It appears that thisdata is form a latest version of the software and therfore cannot be loaded, please contact your supplier."

Thanks for your support

Simon

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: 2D Design Version 2 will not open certain files.

Post by Steve » Tue 13 Dec , 2011 10:24 am

I suggest you check the version of Techsoft on each indevidual workstation as I believe one of them will be running an older version.

Go to HELP ABOUT to check the version.

Post Reply