What CD's / Floppy discs do i require to output to Denford

A forum for issues relating to the use of TechSoft 2D design and Denford CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

What CD's / Floppy discs do i require to output to Denford

Post by bradders » Wed 22 Feb , 2006 15:28 pm

What CD's / Floppy discs do i require to output to Denford machine tools?

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Wed 22 Feb , 2006 15:28 pm

There are 3 items to get the Techsoft 2D software to have Denford Machines in the PLOT list

1. Techsoft 2D CD
2. Techsoft 2D 3-1/2" registration floppy with EXTENSION DENFORD written on it
3. A Denford CD or 3-1/2" floppy titled DENFORD TECHSOFT EXTENSIONS.

If you just install these then the Denford Machine names should appear in the PLOT list

Post Reply