Page 1 of 1
Micromill and Techsoft 2D Design
Posted: Thu 21 Feb , 2008 20:24 pm
by mmjkaejec
How do I add my micromill to the CNC outputs on my 2 D Design software. I have down loaded the Denford extension but dont know how to use it. The micromill has been gathering dust for somtime. Is it worth upgrading and how much will that cost? it is a 2001 version.
Posted: Fri 22 Feb , 2008 9:53 am
by bradders
Just install the Denford Extensions from what you have downloaded
In Techsoft 2D if you go to FILE > PLOT Arrow down in PLOTTING DEVICE, scroll up you should see
Denford Micromill (Link)
Denford Micromill 2000 (Link)
E mail your Micromill Serial No to
service@denford.co.uk and we will be in touch
Micromill
Posted: Fri 22 Feb , 2008 11:56 am
by mmjkaejec
Tried that but still cant see the Denford micromill. I have E mailed the seriel number.
Posted: Fri 22 Feb , 2008 12:05 pm
by bradders
Use help in Techsoft 2D and search for Denford and this gives you information ans paths.
Are you logging in as an Administrator or a User on your PC ?
Posted: Fri 22 Feb , 2008 12:56 pm
by Martin
You also need a Techsoft update.
2. Techsoft 2D 3-1/2" registration floppy with EXTENSION DENFORD written on it
viewtopic.php?t=11