SOLIDWORKS TO QUICKTURN 2D

A forum for issues relating to the use of TechSoft 2D design and Denford CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
kokotis
Posts: 8
Joined: Mon 25 Oct , 2021 11:29 am
Hardware/Software: quick turn 2D
denford micro turn pro in schools

SOLIDWORKS TO QUICKTURN 2D

Post by kokotis » Thu 02 Dec , 2021 11:29 am

Good morning,

the official seller that provided the lathe (micro turn pro) to my university told them that it is possible to enter a solidworks design directly into the opperating system of the lathe. I have been trying to figure out how it can be done for a week now. Can someone provide me some instructions such as the type of file the solid works design has to be saved as, and the procedure after that ?

Than you in advance !

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1445
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: SOLIDWORKS TO QUICKTURN 2D

Post by Steve » Mon 06 Dec , 2021 12:14 pm

Hi,

If you wanted to export to the lathe directly from solid works you would have to post process the file within solid works.

If you dont have a post processor then you would have to create one.

The information required is available on the forum.

https://www.denfordata.com/bb/viewforum.php?f=16

Post Reply