Tool tip angle stored incorrectly in Imperial mode.
Posted: Mon 07 Nov , 2022 11:24 am
Open QT2DD
Click options
Click Machine Options
Select Imperial
Click OK
Click options
Select Machine Tooling
Select a tool.
Change the tip angle say from 65deg to 55deg
Click OK in tool window
Click OK at bottom of the page
Click options
Select Machine Tooling
Select the tool whose tip angle has just been changed.
Value is shown is tool angle in degrees multiplied by 25.4 ie 1397 for 55deg and 1651 for 65deg.
Click options
Click Machine Options
Select Imperial
Click OK
Click options
Select Machine Tooling
Select a tool.
Change the tip angle say from 65deg to 55deg
Click OK in tool window
Click OK at bottom of the page
Click options
Select Machine Tooling
Select the tool whose tip angle has just been changed.
Value is shown is tool angle in degrees multiplied by 25.4 ie 1397 for 55deg and 1651 for 65deg.