VR Milling Ver 2 User access rights

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

VR Milling Ver 2 User access rights

Post by bradders » Mon 12 Feb , 2007 14:31 pm

I get user access rights problem when running VR Milling Ver 2 when installed locally on a PC, what directories / files do i have to give access to ? and do they need to be READ /WRITE ?
Top
User avatar
Denford Admin
Site Admin
Posts: 3635
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Thu 22 Feb , 2007 16:03 pm

On this older version of VR Milling, you may need to give read/write access to:
c:\program files\denford\vrmilling
and any subfolders

You would also want to give read/write to \my documents\denford\cnc files if not already set
Top
Post Reply

Return to “VR Milling - All Versions”