VR Milling v6.16 released 21st February 2024

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse

VR Milling v6.16 released 21st February 2024

Post by Denford Admin » Wed 21 Feb , 2024 15:24 pm

VR Milling v6.16 released 21st February 2024

Check here to download the latest version of all software:

// 21st February 2024

Improvement to the import of DXF files. All DXFs that have been tested have all been imported, regardless of the DXF version.
The F1 Router has been renamed to be MCR 100
The model of the MCR 100 in the simulator is now correct, and doesn't use the Compact 1000 model anymore
It was possible on the Microrouter and VMC to exceed the maximum spindle revs by moving the override over 100%. The maximum cannot be exceeded now.

Post Reply