VR Milling v5.54 released 5th Sep 2013

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Milling v5.54 released 5th Sep 2013

Post by Denford Admin » Thu 05 Sep , 2013 16:20 pm

// 6th Sep 2012 v5.53 - found that mirror and other transforms were effecting billetdef causing 2d/3d simulation to crash (fixed in CNC_ABS)
// 6th Sep 2012 v5.53 - also fixed an issue where mirror was creating zero length moves when no move was programmed (eg, just G19 on a line)

// 15th Jan 2013 v5.54 - updated Router 2600 and 2600 pro manuals
// 22nd Apr 2013 v5.54 - Gerber updates for regions and Dark/Clear modes..use GerberReader.DrawCircuit instead of your own drawlines

Download the latest version on this page:
http://website.denford.ltd.uk/index.php ... -downloads

Post Reply