Machine Status - Debug machine I/O
Posted: Thu 14 Mar , 2013 12:35 pm
This is a utility that will help you diagnose problems such as :- "Guard Open", "Emergency Stop activated" etc
From the top menu bar in VR Milling version 5, select SETUP > DEBUG MACHINE I/O, by opening and closing the door and pressing in and releasing the emergency stop button, you should be able to see the status changing.
From the top menu bar in VR Milling version 5, select SETUP > DEBUG MACHINE I/O, by opening and closing the door and pressing in and releasing the emergency stop button, you should be able to see the status changing.