VR Milling v5.43 released 17th May 2011

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Milling v5.43 released 17th May 2011

Post by Denford Admin » Wed 04 May , 2011 9:30 am

Check here to download the latest version of all software:
http://www.website.denford.ltd.uk/suppo ... -downloads

v5.43 - Changes to make it not virtualise on Windows 7 (so QuickCAM Pro for eg. can use the same CommonAppData folder and not virtual ones)
v5.43 - UAC mods to warn if offsets and materials not editable
v5.43 - fixed inch mode not being saved if a normal user
v5.43 - fixed tool offset issue when changing from an 8 tool to a 6 tool machine (the old tool 8 became the new tool 6)
v5.43 - fix to singlestep on real machines - broken in 5.42

Post Reply