VR Milling v5.34 released 25 May 2010

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Milling v5.34 released 25 May 2010

Post by Denford Admin » Mon 05 Jul , 2010 9:35 am

Check here to download the latest version of all software:
http://www.website.denford.ltd.uk/suppo ... -downloads

v5.34 - MRC40 added - CE type machine only
v5.34 - rapid feedrate is not set to the axes rapid if a 4th axis move is commanded - the Vertical Router would cause the 4th axis to run too quickly occasionally.
v5.34 - 64 bit and 32bit USB drivers updated - two new options on the CD starting menu

davidfhu
Posts: 33
Joined: Fri 23 Oct , 2009 15:27 pm

Re: VR Milling v5.34 released 25 May 2010

Post by davidfhu » Mon 05 Jul , 2010 9:44 am

Hi,

Did not see the update on the web site.
Best regards,

David Fhu

“Dream as if you'll live forever, live as if you'll die today.” - James Dean

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: VR Milling v5.34 released 25 May 2010

Post by Denford Admin » Mon 05 Jul , 2010 9:46 am

It's currently still uploading (160 Mb) ....

davidfhu
Posts: 33
Joined: Fri 23 Oct , 2009 15:27 pm

Re: VR Milling v5.34 released 25 May 2010

Post by davidfhu » Mon 05 Jul , 2010 10:05 am

With the new updated, for those user for older version VR Milling user, what should they do in order to upgrade their current software?

Do we need to uninstall and reinstall? Please advice.
Best regards,

David Fhu

“Dream as if you'll live forever, live as if you'll die today.” - James Dean

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: VR Milling v5.34 released 25 May 2010

Post by Denford Admin » Mon 05 Jul , 2010 10:14 am

It is uploaded now.

If they have version 2 VR Milling, then upgrade will be chargeable, and could require a hardware update to USB connection.

If they have an older version of V5 Milling, then it is best practice to UN install the current version first and then install the new version.
It is worth saving a copy of the offsets file before uninstalling / installing:
viewtopic.php?f=2&t=166

Post Reply