VR Milling v5.31 released 29th Oct 2009

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Milling v5.31 released 29th Oct 2009

Post by Denford Admin » Thu 29 Oct , 2009 13:33 pm

// 22/10/2009 v5.31 - Fixed access violations when switching to Fanuc editors...probably introduced in v5.28 (datum position (eg centre) not being updated)
// 28/10/2009 v5.31 - Fixed a bug in 2d/3d output which would show the wrong Y values if you ran a program with 2D mode showing, worked ok if you ran it in 3D, then switched to 2D
// 28/10/2009 v5.31 - All pdf manuals updated

Look for the latest version here:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply