415v triac

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
jim the fish
Posts: 15
Joined: Sun 23 Jul , 2006 12:04 pm

415v triac

Post by jim the fish » Fri 19 Oct , 2007 17:00 pm

Hi I have purchased a triac which is 415v 3 phase. It comes with all the transformers etc, can I run it on 240v without the box of electrics or will I have to buy a 3 phase converter to run it off a 240 volt household supply.
Top
Martin
CNC Guru
CNC Guru
Posts: 1900
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Post by Martin » Sat 20 Oct , 2007 7:51 am

Is it a true Fanuc control?
What drives/motors are fitted.

I guess the spindle drive will need a 3 phase supply so it will be easier to purchase a phase inverter.
Top
jim the fish
Posts: 15
Joined: Sun 23 Jul , 2006 12:04 pm

415v

Post by jim the fish » Sat 20 Oct , 2007 8:30 am

Cheers Martin, I thought it would cost me more dosh, its a true fanuc control and the motor drive characteristics are different from the 240v version. So it looks like a digital phase converter, any prefered type.
Jim the fish
Top
Post Reply

Return to “VR Milling - All Versions”