RED 7 segment V GREEN 7 segment Baldor cards
Moderators: Martin, Steve, Mr Magoo
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
RED 7 segment V GREEN 7 segment Baldor cards
What is the difference with RED 7 segment and GREEN 7 segment Baldor cards ?
Last edited by bradders on Wed 01 Aug , 2007 9:59 am, edited 1 time in total.
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
VR Milling Ver 5
RED 7 segment = Denstep - select LEGACY Machines
GREEN 7 segment = Nextstep / Nextmove - select DEFAULT Machines that appear when SETUP > SELECT MACHINE is selected in VR Milling Ver 5.
VR Milling 5 Parameters Note !
A 0 in COMMUNICATIONS > CONTROL TYPE = DENSTEP Board
A 7 in COMMUNICATIONS > CONTROL TYPE = NEXTSTEP Board old firmware
A 9 in COMMUNICATIONS > CONTROL TYPE = NEXTSTEP Board new firmware
NB, 7 or 9 will be automatically chosen by the software according to the firmware thats on the card, but it won't do any harm to set it correctly in the first place
RED 7 segment = Denstep - select LEGACY Machines
GREEN 7 segment = Nextstep / Nextmove - select DEFAULT Machines that appear when SETUP > SELECT MACHINE is selected in VR Milling Ver 5.
VR Milling 5 Parameters Note !
A 0 in COMMUNICATIONS > CONTROL TYPE = DENSTEP Board
A 7 in COMMUNICATIONS > CONTROL TYPE = NEXTSTEP Board old firmware
A 9 in COMMUNICATIONS > CONTROL TYPE = NEXTSTEP Board new firmware
NB, 7 or 9 will be automatically chosen by the software according to the firmware thats on the card, but it won't do any harm to set it correctly in the first place