Catastrophic error!
Moderators: Martin, Steve, Mr Magoo
Catastrophic error!
I am getting the above error when trying run a program using the virtual machine.
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
When does the error occur as soon as you press the VR Machine button?
Does the software connect and run your machine OK?
Has the VR option run OK before ?
What version of VR Milling are you using ?
Does the software connect and run your machine OK?
Has the VR option run OK before ?
What version of VR Milling are you using ?
Last edited by bradders on Fri 06 Jul , 2007 9:15 am, edited 1 time in total.
-
Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
"Catastrophic failure" is something to do with OpenGL 3D - check and update your graphic card drivers.
Confirm the problem by reducing hardware acceleration to None (see this post for details on how to do that: viewtopic.php?t=289)
Confirm the problem by reducing hardware acceleration to None (see this post for details on how to do that: viewtopic.php?t=289)