Triac Fanuc OMC Electrical Drawings

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
Martin
CNC Guru
CNC Guru
Posts: 1807
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Triac Fanuc OMC Electrical Drawings

Post by Martin » Mon 08 Mar , 2010 11:20 am

Triac Fanuc OMC electrcail drawings
Attachments
Triac Fanuc OMC.pdf
(758.2 KiB) Downloaded 1295 times

jaycnc
CNC Apprentice
CNC Apprentice
Posts: 59
Joined: Wed 27 Aug , 2008 13:27 pm
Location: chesterfield

Re: Triac Fanuc OMC Electrical Drawings

Post by jaycnc » Mon 08 Mar , 2010 11:55 am

Thanks for the atatchments guys its much appreciated.
After doing some searching last night it would appear that the control boards are still made for these and i also found a place that repairs them for £168 so alls not lost if it turns out to be the drive card.
Some how i feel a lot better now :lolol:

User avatar
Denford Admin
Site Admin
Posts: 3600
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Triac Fanuc OMC Electrical Drawings

Post by Denford Admin » Mon 08 Mar , 2010 12:11 pm

We should be able to supply a new sprint drive which is still used, from what I can see, (but don't quote me on this) they are just under £200
It's worth emailing sales :bert: denford :ernie: co :ernie: uk

jaycnc
CNC Apprentice
CNC Apprentice
Posts: 59
Joined: Wed 27 Aug , 2008 13:27 pm
Location: chesterfield

Re: Triac Fanuc OMC Electrical Drawings

Post by jaycnc » Mon 08 Mar , 2010 21:45 pm

Denford Admin wrote:We should be able to supply a new sprint drive which is still used, from what I can see, (but don't quote me on this) they are just under £200
It's worth emailing sales :bert: denford :ernie: co :ernie: uk

Will these work as a direct replacment to what i already have and is there much setting up to be done at all??

Martin
CNC Guru
CNC Guru
Posts: 1807
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Triac Fanuc OMC Electrical Drawings

Post by Martin » Mon 08 Mar , 2010 23:49 pm

You would need a tacho to read the spindle speed when setting it up but the rest is straightforward.
If you have the current drive repaired check that the pots are set to the same position as they were when you fitt it back in.

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1340
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Triac Fanuc OMC Electrical Drawings

Post by Steve » Tue 09 Mar , 2010 10:08 am

BI00307H Sprint 1200 sells for £198 and we have 4 in stock.

Martin
CNC Guru
CNC Guru
Posts: 1807
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Triac Fanuc OMC Electrical Drawings

Post by Martin » Tue 09 Mar , 2010 17:37 pm

Does it not need to be a Sprint 1200i with it being on a Fanuc

User avatar
Denford Admin
Site Admin
Posts: 3600
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Triac Fanuc OMC Electrical Drawings

Post by Denford Admin » Wed 10 Mar , 2010 10:41 am

Don't our suppliers still do the Lynx by the way ?

Post Reply