Denford Star turn

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
A.PENNOCK
Posts: 13
Joined: Wed 14 Feb , 2007 19:25 pm

Denford Star turn

Post by A.PENNOCK » Sat 05 Dec , 2009 9:57 am

Ihave a complete star turn lathe can this be upgraded to run on a modern machine running windows xp? if so how can it be done and does anyone out there have any driver disks to run with windows

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Denford Star turn

Post by Denford Admin » Mon 07 Dec , 2009 9:25 am

If you can post a photo of the electrical box we'd have a better idea what can be done.
Whichever control it has inside though, you'd probably be able to rewire it, replace the stepper drives and motors, and run MACH 3 from a windows PC.

The upgrade options from us would depend on the current control hardware, and would probably be the more expensive

Post Reply