fanuc 0tc 0mc RS232 reader puncher parameters

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3600
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse

fanuc 0tc 0mc RS232 reader puncher parameters

Post by Denford Admin » Mon 23 Nov , 2009 16:50 pm

Some tips on setting up the Fanuc reader punch RS232 interface.
eg parameter 552 for baudrate (10 is 4800 baud)
(34.2 KiB) Downloaded 3660 times

Post Reply