Viceroy 280 VS Lathe Manual

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Viceroy 280 VS Lathe Manual

Post by bradders » Thu 23 Apr , 2009 8:54 am

Viceroy 280 VS Lathe Manual
Attachments
Viceroy 280 VS Lathe.pdf
(861.25 KiB) Downloaded 4587 times

andrewburnley
Posts: 1
Joined: Tue 08 Dec , 2009 13:01 pm

Re: Viceroy 280 VS Lathe Manual

Post by andrewburnley » Tue 08 Dec , 2009 15:07 pm

Dear bradders,

I have a Viceroy 280vs lathe at my place of work.

I have downloaded the Lathe Manual OK. Many thanks for making it available.

Is there any chance of the electrical circuit diagram being available anywhere ?

Yours,

Andrew

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Viceroy 280 VS Lathe Manual

Post by Andy B » Wed 09 Dec , 2009 14:11 pm

Which 280VS model do you have - manual variable speed (with handwheel mounted on front of stand) or electric (joystick on control box mounted above headstock)?

I have the electrical schematic for the latter - will post a scan or give you the number for Admin to find - may be a couple of days though.
Denfords don't have the circuit board data as they were outsourced - but I have a self-drawn schematic for the later speed readout board if needed.

Andy

elderly
Posts: 7
Joined: Wed 26 Jan , 2011 17:16 pm
Hardware/Software: Viceroy 280VS

Re: Viceroy 280 VS Lathe Manual

Post by elderly » Wed 26 Jan , 2011 18:24 pm

Many thanks for manual, it was most helpful

bottleveg
Posts: 14
Joined: Thu 28 Feb , 2013 12:17 pm

Re: Viceroy 280 VS Lathe Manual

Post by bottleveg » Sat 07 Nov , 2015 16:20 pm

Andy B wrote:Which 280VS model do you have - manual variable speed (with handwheel mounted on front of stand) or electric (joystick on control box mounted above headstock)?

I have the electrical schematic for the latter - will post a scan or give you the number for Admin to find - may be a couple of days though.
Denfords don't have the circuit board data as they were outsourced - but I have a self-drawn schematic for the later speed readout board if needed.

Andy
I have the latter. Any chance of a copy of the schematic?
Many thanks, Mark.

Post Reply