Denford Software & Machines

Viceroy 280 VS Lathe Manual

Dear bradders,

I have a Viceroy 280vs lathe at my place of work.

I have downloaded the Lathe Manual OK. Many thanks for making it available.

Is there any chance of the electrical circuit diagram being available anywhere ?

Yours,

Andrew

Which 280VS model do you have - manual variable speed (with handwheel mounted on front of stand) or electric (joystick on control box mounted above headstock)?

I have the electrical schematic for the latter - will post a scan or give you the number for Admin to find - may be a couple of days though.
Denfords don't have the circuit board data as they were outsourced - but I have a self-drawn schematic for the later speed readout board if needed.

Andy

Many thanks for manual, it was most helpful

Andy B wrote:Which 280VS model do you have - manual variable speed (with handwheel mounted on front of stand) or electric (joystick on control box mounted above headstock)?

I have the electrical schematic for the latter - will post a scan or give you the number for Admin to find - may be a couple of days though.
Denfords don't have the circuit board data as they were outsourced - but I have a self-drawn schematic for the later speed readout board if needed.

Andy

I have the latter. Any chance of a copy of the schematic?
Many thanks, Mark.