Viceroy TDS29 Sharpedge Documents found

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3600
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Viceroy TDS29 Sharpedge Documents found

Post by Denford Admin » Mon 04 Feb , 2008 18:06 pm

Came across these today:
Viceroy TDS29 Sharpedge colour brochure and a draft of the setup instructions

User avatar
Denford Admin
Site Admin
Posts: 3600
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Mon 04 Feb , 2008 18:07 pm

Pictures and PDFs attached....
Attachments
Viceroy-TDS29-sharpedge-brochure4.jpg
Viceroy-TDS29-sharpedge-brochure4.jpg (184.34 KiB) Viewed 8001 times
Viceroy-TDS29-sharpedge-brochure3.jpg
Viceroy-TDS29-sharpedge-brochure3.jpg (167.75 KiB) Viewed 8001 times
Viceroy-TDS29-sharpedge-brochure2.jpg
Viceroy-TDS29-sharpedge-brochure2.jpg (159.5 KiB) Viewed 8001 times
Viceroy-TDS29-sharpedge-brochure1.jpg
Viceroy-TDS29-sharpedge-brochure1.jpg (193.54 KiB) Viewed 8001 times

User avatar
Denford Admin
Site Admin
Posts: 3600
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Mon 04 Feb , 2008 18:07 pm

PDF instruction pages:
Attachments
Viceroy-TDS29-sharpedge-Setting-Instructions3.pdf
(35.19 KiB) Downloaded 824 times
Viceroy-TDS29-sharpedge-Setting-Instructions2.pdf
(92.27 KiB) Downloaded 842 times
Viceroy-TDS29-sharpedge-Setting-Instructions1.pdf
(46.48 KiB) Downloaded 842 times

Andy B
CNC Guru
CNC Guru
Posts: 383
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Parts list for TDS29

Post by Andy B » Wed 19 Nov , 2008 16:35 pm

Here is the parts list for the TDS29.
Attachments
TDS29 drillsharpener.pdf
TDS29 Drill Sharpener parts list
(1.56 MiB) Downloaded 926 times

evildrome
Posts: 3
Joined: Tue 03 Jan , 2012 23:27 pm

Re: Viceroy TDS29 Sharpedge Documents found

Post by evildrome » Tue 03 Jan , 2012 23:59 pm

Hi,

Has anyone got dimensions for the setting piece 'G'.

I have one of these sharpeners but no instructions and no setting piece.

I didn't know it existed which has led to some interesting results.

Cheers,

Wilson Logan.

P.S. any info on how to do drill point thinning would be appreciated.

User avatar
Denford Admin
Site Admin
Posts: 3600
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Viceroy TDS29 Sharpedge Documents found

Post by Denford Admin » Wed 04 Jan , 2012 15:17 pm

The mechanical drawings we scanned are here but not sure if it contains what you need...
Attachments
DSM-TDS29-Drawings.pdf
(3.53 MiB) Downloaded 801 times

Post Reply