I have made a pdf file for anyone who might be using this software.
I hope it is of some help.
Lathe Cam Designer Manual, in pdf format
Moderators: Martin, Steve, Mr Magoo
Lathe Cam Designer Manual, in pdf format
- Attachments
-
- lathe cam designer.pdf
- (5.63 MiB) Downloaded 1396 times
-
Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Lathe Cam Designer Manual, in pdf format
Thanks for taking the time to scan and upload these 
Re: Lathe Cam Designer Manual, in pdf format
Hi,Denford Admin wrote:Thanks for taking the time to scan and upload these
You're very welcome. I have had so much help from this great forum, that I wanted to give back what I could.
I have more that I will upload, but they have much more pages to them, so will take a bit of time. I was simply testing that it works last night, so now I know what to do, I'll will do more.
-
Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Lathe Cam Designer Manual, in pdf format
Ok thanks - I've just checked the attachment settings and there is a 6Mb limit on each file - if they turn out to be bigger, then email them to info 
denford 
co uk
denford co ukRe: Lathe Cam Designer Manual, in pdf format
Denford Admin wrote:Ok thanks - I've just checked the attachment settings and there is a 6Mb limit on each file - if they turn out to be bigger, then email them to info
O.K. Thanks for the info.