VICEROY DRILL SHARPENING MACHINE TDS 29

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
GOLDTHORN
Posts: 4
Joined: Mon 27 Jul , 2020 21:36 pm
Hardware/Software: WINDOWS 10

VICEROY DRILL SHARPENING MACHINE TDS 29

Post by GOLDTHORN » Fri 19 Feb , 2021 22:47 pm

Hello .

A while ago I acquired the remains of one of these machines , which the previous owner had used some of the parts for another project - mainly the 6 jaw chuck and compound / swivel slide assembly.

I am hoping to restore / reconstruct this machine for use in my home workshop

A lot of drawings and the Parts List have been posted on here by Andy B which will be very useful, but there are several parts for which the original drawings do not now appear to exist.

My question is : are any drawings with someone else apart from Andy B and does anyone have or know of one of these machines I can have a look at and make a few sketches to reverse engineer what I am missing ?

Any suggestions would be much appreciated ! ...............................

Thanks.

MARK

Post Reply