Working 12 cylinder diesel engine model-made by hand

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Working 12 cylinder diesel engine model-made by hand

Post by Denford Admin » Thu 24 Jan , 2013 11:17 am

This is amazing:
http://www.wimp.com/tiniestengine/

Is that a Viceroy he's using by the way ??

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Working 12 cylinder diesel engine model-made by hand

Post by Andy B » Thu 24 Jan , 2013 19:10 pm

Denford Admin wrote: Is that a Viceroy he's using by the way ??
No - the cross slide and carriage are the wrong shape.

Andy

Post Reply