Mirac KEB Inverter pane

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
staceyh74
Posts: 3
Joined: Fri 01 Jan , 2021 17:49 pm
Hardware/Software: MicroMill, MicroRouter both with GRBL

Mirac KEB Inverter pane

Post by staceyh74 » Fri 01 Jan , 2021 18:46 pm

Hi All,

Does anyone (Denford included) have a display panel for the KEB inverter in the back of the Mirac (KEB 00.F4.010-2009 I think). I have most of the parts from an old Mirac (from a school, the toll head was dead).

I have the motors (spindle and steppers) and most of the electronics, so far I have resurrected a MicroMill and a MicroRouter and both are running now, but I would love to install a new spindle on the Microrouter, I have two of the KEB 07 f4 inverters from the Mirac, one will stay with the .75KW drive motor, the other is spare, if I can reconfigure it with the display I can use it with a new spindle.

I just need to borrow the display to edit the config

Thanks in advance

Stacey
Attachments
KEB-Panel.PNG
KEB-Panel.PNG (320.67 KiB) Viewed 6100 times

Post Reply