wanted denford orac cnc lathe

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
rab4steam
Posts: 28
Joined: Wed 27 Feb , 2008 20:10 pm
Location: Huddersfield , West Yoks

wanted denford orac cnc lathe

Post by rab4steam » Mon 25 Feb , 2019 21:21 pm

hi
i am looking for a denford orac lathe , not bothered if it is a non runner or a working machine so long as all the main parts are there
willing to travel
thank you
robert
Denford Orac cnc Lathe
Denford Easiturn Lathe with a Fagor 8020 TG control system also fitted with a biffaldi 6 station tool changer

Teamddr
Posts: 1
Joined: Wed 10 Jun , 2020 11:13 am
Hardware/Software: Orac

Re: wanted denford orac cnc lathe

Post by Teamddr » Wed 10 Jun , 2020 11:18 am

Hi Robert
Did you ever get an orac, I have one here that I have decided to sell. No mods done to it just needs some cleaning.

rab4steam
Posts: 28
Joined: Wed 27 Feb , 2008 20:10 pm
Location: Huddersfield , West Yoks

Re: wanted denford orac cnc lathe

Post by rab4steam » Wed 10 Jun , 2020 13:09 pm

hi
thank for your email about request about a denford orac
what sort of price are you thinking of ?
have you any photo's of your orac ?
where abouts in the country do you live
is the machine a runner or is it strip down and convert to modern electronics & mach 3 software
if the price is ok i would like to give it a good look over , i am willing to travel but at the moment
this can be a bit difficult
i live in Huddersfield ,West Yorkshire
all the best
Robert Barker
Denford Orac cnc Lathe
Denford Easiturn Lathe with a Fagor 8020 TG control system also fitted with a biffaldi 6 station tool changer

tulgeywoodman
Posts: 5
Joined: Thu 11 Jun , 2020 9:15 am

Re: wanted denford orac cnc lathe

Post by tulgeywoodman » Thu 11 Jun , 2020 9:53 am

Hi Robert
I just registered and posted.
I have an Incomplete Orac, but in good condition
I can send or post pics
Located Chester, UK
Eric

rab4steam
Posts: 28
Joined: Wed 27 Feb , 2008 20:10 pm
Location: Huddersfield , West Yoks

Re: wanted denford orac cnc lathe

Post by rab4steam » Thu 11 Jun , 2020 12:52 pm

hi
thank you for your interest in my wanted advert for a denford orac cnc lathe
i would be very interested in seeing some photo's of the machine you have & also you are within a reasonable driveable distance from me
all the best
Robert Barker
Denford Orac cnc Lathe
Denford Easiturn Lathe with a Fagor 8020 TG control system also fitted with a biffaldi 6 station tool changer

tulgeywoodman
Posts: 5
Joined: Thu 11 Jun , 2020 9:15 am

Re: wanted denford orac cnc lathe

Post by tulgeywoodman » Thu 11 Jun , 2020 19:55 pm

Hi Robert
I am 68 mls from you.
I will post some pics later
Regards
Eric

rab4steam
Posts: 28
Joined: Wed 27 Feb , 2008 20:10 pm
Location: Huddersfield , West Yoks

Re: wanted denford orac cnc lathe

Post by rab4steam » Fri 12 Jun , 2020 8:33 am

hi
thanks for reply about your denford orac cnc lathe
please send photo's to my email at -r4robert.barker@gmail.com
thanks
robert
Denford Orac cnc Lathe
Denford Easiturn Lathe with a Fagor 8020 TG control system also fitted with a biffaldi 6 station tool changer

rab4steam
Posts: 28
Joined: Wed 27 Feb , 2008 20:10 pm
Location: Huddersfield , West Yoks

Re: wanted denford orac cnc lathe

Post by rab4steam » Fri 12 Jun , 2020 13:03 pm

hi
i would like to ask a question about your orac
does the machine still use the ball screws & nuts , if not have they been taken off & scrapped or have they been saved
i would like to see some photo's just to see if it is fit to reclaim back to a cnc lathe
all the best
robert
Denford Orac cnc Lathe
Denford Easiturn Lathe with a Fagor 8020 TG control system also fitted with a biffaldi 6 station tool changer

Post Reply