I have some tool holders to fit the 8 station Baruffaldi turret on the Cyclone and possibly other machine, made from mild steel and chemical blackened. The bore is left undersize so that it can be trued up in the machine. £28 each delivered. Please not these will NOT fit on a 6 station turret.
I also have some ER16 and ER25 Collet Chucks that I have modified to fit in the above holders. £35 each delivered.
Denford CNC Baruffaldi Lathe Tool Holders
Moderators: Martin, Steve, Mr Magoo
-
- CNC Apprentice
- Posts: 89
- Joined: Sat 01 Aug , 2015 9:23 am
- Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph
1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph
Denford CNC Baruffaldi Lathe Tool Holders
Last edited by jamesgates1000 on Sat 18 Mar , 2017 16:16 pm, edited 1 time in total.
-
- Posts: 1
- Joined: Mon 06 Mar , 2017 17:39 pm
Re: Denford CNC Baruffaldi Lathe Tool Holders
"I have some tool holders to fit the Baruffaldi turret on the Cyclone and possibly other machine, made from mild steel and chemical blackened. The bore is left undersize so that it can be trued up in the machine. £28 each delivered."
Hi James,
Do you have an email. Im interested in purchasing 4 of the tool holders from you.
Hi James,
Do you have an email. Im interested in purchasing 4 of the tool holders from you.
Re: Denford CNC Baruffaldi Lathe Tool Holders
Hello
Im interested in purchasing 4 of the tool holders from you. Regards
Im interested in purchasing 4 of the tool holders from you. Regards