Hi,
Wondered if anyone can help, i have a denford triac and cyclone. Both are missing the key to turn off program lock.
Has anyone got a spare lock and key i can replace mine with. Also looking for a fanuc green push button for atc rotate and one of the rubber levelling pads.
Thanks
WANTED - fanuc triac levelling pad and buttons
Moderators: Martin, Steve, Mr Magoo
-
- CNC Apprentice
- Posts: 89
- Joined: Sat 01 Aug , 2015 9:23 am
- Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph
1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph
-
- CNC Apprentice
- Posts: 89
- Joined: Sat 01 Aug , 2015 9:23 am
- Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph
1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph
Re: WANTED - fanuc triac levelling pad and buttons
I have sourced a replacement green button and rewired the keyed swiches to enable program edit.
Still looking for one levelling pad though!
Still looking for one levelling pad though!