LaserCAM 2d crashing when trying to choose paper or Vellum

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
hobzy
Posts: 4
Joined: Thu 03 Jul , 2014 13:08 pm

LaserCAM 2d crashing when trying to choose paper or Vellum

Post by hobzy » Thu 03 Jul , 2014 13:12 pm

We have a Versalaser 3.50, and we are trying to cut some card stencils out. Whenever we choose Paper or Vellum, the ULSCP crashes. Any ideas why? I've managed to do some using manual setting under balsa, but this is obviously not ideal.

Using LaserCAM 2d...

Thanks,

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: LaserCAM 2d crashing when trying to choose paper or Vell

Post by Martin » Thu 03 Jul , 2014 20:17 pm

Are you using the latest version of LaserCAM?

Version 1.15 can be downloaded from the Denford website.

hobzy
Posts: 4
Joined: Thu 03 Jul , 2014 13:08 pm

Re: LaserCAM 2d crashing when trying to choose paper or Vell

Post by hobzy » Fri 18 Jul , 2014 10:09 am

Thanks - will check.

Post Reply