QuickCam 3d Milling and QuickCam 2d Problems
Posted: Tue 30 Sep , 2008 8:58 am
In Quick Cam 3D Milling when we start the program it gives the error that is in the attached file. It gives that error in the 5 laptops it is installed. It works fine with other laptop from a different brand and Software. It works with a IBM laptop with windows 2000 professional but It doesn’t work with a Laptop HP nc8430 with Windows XP SP2. I’ve uninstall and Install the software, deleted temp and temporary Internet Files
The software is Quick Cam 3D Milling v3.2
In Quick Cam 2d Design we’re also having a problem. After done some drawing, when we go to Cam Wizard/Inside Offset/ it appear “no tools available and the depth of cut only allow a value between 0 and 0,5. This only happens on those same computers described above but it works fine with the IBM laptop.
The Software is Quick Cam 2D design v1.9 , downloaded today from your web site because the older version had the same problem.
The software is Quick Cam 3D Milling v3.2
In Quick Cam 2d Design we’re also having a problem. After done some drawing, when we go to Cam Wizard/Inside Offset/ it appear “no tools available and the depth of cut only allow a value between 0 and 0,5. This only happens on those same computers described above but it works fine with the IBM laptop.
The Software is Quick Cam 2D design v1.9 , downloaded today from your web site because the older version had the same problem.