LaserCAM and QuickCAM 2D v1.7 released 5th July 2007

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

LaserCAM and QuickCAM 2D v1.7 released 5th July 2007

Post by Denford Admin » Fri 27 Jul , 2007 13:23 pm

Announcement is a bit late, but v1.7 has these updates:

Added Brightness/Contrast/Greyscale/Invert/Halftone(lots of variants) into a new image editing screen within the image import thumbnail bit.

Fixed cursor display not showing inch values when units are set to inch

Improved image contouring - its faster and makes smoother lines

added a message to warn if printer page size could not be read (Versalaser drivers often return 0 width & height until you have gone to properties and selected a material in the VLS/PLS driver)

check for latest version here:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply