LaserCam 2D .MAT Installation Error

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

LaserCam 2D .MAT Installation Error

Post by bradders » Tue 05 Jun , 2007 14:01 pm

When I try and install LaserCam 2D as administrator, I get the following Error Message
Attachments
Quickcam2d.mat.JPG
Quickcam2d.mat.JPG (81.51 KiB) Viewed 10822 times
Last edited by bradders on Fri 08 Jun , 2007 6:29 am, edited 2 times in total.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Post by Martin » Thu 07 Jun , 2007 21:43 pm

If you install LaserCam on a clean PC you get the error as stated.
By installing QuickCam2D the relevent files/changes are added & LaserCam will then work OK.

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Tue 19 Jun , 2007 17:02 pm

Try the latest version:
viewtopic.php?t=1020

This has hopefully fixed the issue

marcothomus
Posts: 1
Joined: Tue 20 Nov , 2018 11:18 am

Re: LaserCam 2D .MAT Installation Error

Post by marcothomus » Tue 20 Nov , 2018 11:37 am

Hello, martin,


Thanks for sharing details I have also use Quickcam 2D software its relevant software.


Thanks for again!

termite inspection

Post Reply