QuickCAM 2D v2.8 released 1st July 2022

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickCAM 2D v2.8 released 1st July 2022

Post by Denford Admin » Wed 17 Aug , 2022 15:28 pm

QuickCAM 2D v2.8 released 1st July 2022

The tool library for QuickCAM 2D comes from with VR Milling 5 or 6 depending on which is installed, or both if they are both installed.

As usual - check here for the latest version:
http://www.denfordata.com/downloads/Qui ... gnv2.8.zip

Post Reply