Search found 1804 matches

by Martin
Mon 10 May , 2021 13:52 pm
Forum: Software
Topic: Triac VMC, help needed.
Replies: 1
Views: 641

Re: Triac VMC, help needed.

It looks like you have 3 different directory's for the software All the files should be in the same one.
by Martin
Sun 02 May , 2021 12:22 pm
Forum: Electronics
Topic: Work light voltage
Replies: 2
Views: 502

Re: Work light voltage

We have fitted various lights over the years so not sure on the amps but yes they will all have been 24 volts DC.
by Martin
Tue 20 Apr , 2021 12:48 pm
Forum: Triac
Topic: Fanuc Triac - ATC Problem
Replies: 10
Views: 4610

Re: Fanuc Triac - ATC Problem

Have a look at the 100mm stoke cylinders.

https://uk.rs-online.com/web/p/pneumati ... s/3895211/
by Martin
Sun 18 Apr , 2021 11:25 am
Forum: Electronics
Topic: Baldor F391 troubleshooting
Replies: 4
Views: 1087

Re: Baldor F391 troubleshooting

Yes they can be swapped over if that is what you are asking.
by Martin
Fri 16 Apr , 2021 17:05 pm
Forum: Triac
Topic: Fanuc Triac - ATC Problem
Replies: 10
Views: 4610

Re: Fanuc Triac - ATC Problem

I don't think it is correct.

I always thought the stoke lengths are 100mm for up/down & 150mm for in/out.
by Martin
Fri 16 Apr , 2021 17:01 pm
Forum: Electronics
Topic: Baldor F391 troubleshooting
Replies: 4
Views: 1087

Re: Baldor F391 troubleshooting

I don't think we have any information on that either.

We used to return them to Baldor for repair.
by Martin
Fri 02 Apr , 2021 10:36 am
Forum: NovaTurn
Topic: Can I transfer my Novamill control card to a novaturn?
Replies: 7
Views: 3865

Re: Can I transfer my Novamill control card to a novaturn?

You can run EasyUpgrader which is on the VR CNC Install disc to set what machine type is connected.
by Martin
Wed 24 Mar , 2021 21:20 pm
Forum: Router 2600
Topic: Z-axis height
Replies: 2
Views: 878

Re: Z-axis height

It has been designed to allow the user to lower the tool or lift it depending on jobs. The only thing you will need to reset is the workpiece offset.
by Martin
Tue 23 Mar , 2021 10:13 am
Forum: Electronics
Topic: Battery Replacement MicroMill
Replies: 1
Views: 509

Re: Battery Replacement MicroMill

You do not need to replace it. Just remove it as it is not required .
by Martin
Sat 20 Mar , 2021 18:22 pm
Forum: Novamill
Topic: Steppers stalling.
Replies: 3
Views: 801

Re: Steppers stalling.

It is only set to run at 1000mm per min in VR Milling so its about correct unless you have changed something.
by Martin
Tue 16 Mar , 2021 21:56 pm
Forum: ZeroCentre/ZeroTurn/ZeroBore
Topic: 1006 Alarm Code
Replies: 1
Views: 760

Re: 1006 Alarm Code

You need to put tool number up the spindle & align the carousel to the same position & then input a M27 command which will reset to position 1.
by Martin
Sun 14 Mar , 2021 10:43 am
Forum: Triton
Topic: Triton Pro Tool Changer wiring diagram.
Replies: 3
Views: 1681

Re: Triton Pro Tool Changer wiring diagram.

I will see what I can find on Tuesday.
by Martin
Sun 14 Mar , 2021 10:42 am
Forum: Cyclone
Topic: X axis zero return
Replies: 8
Views: 1674

Re: X axis zero return

That is great news. Well done.
by Martin
Fri 12 Mar , 2021 20:53 pm
Forum: Cyclone
Topic: X axis zero return
Replies: 8
Views: 1674

Re: X axis zero return

It moves towards the datum switch & slows down when it detects it. It then carries on for about 25mm at a slow speed until it comes off the switch then it looks for the next marker pulse from the motor & stops. From what you report it does not slow down. Does it definitely activate the diagnostic du...
by Martin
Fri 12 Mar , 2021 20:47 pm
Forum: Novamill
Topic: Novamill communication issue
Replies: 10
Views: 1666

Re: Novamill communication issue

If you look in the VRMilling directory on the computer you can try Mintfinder to see if that will connect.
by Martin
Fri 12 Mar , 2021 11:20 am
Forum: Cyclone
Topic: X axis zero return
Replies: 8
Views: 1674

Re: X axis zero return

You should see the switch in the diagnostics as below.

The X axis datum switch is Diagnostic 16 bit 5
The Z axis datum switch is Diagnostic 17 bit 5
by Martin
Thu 11 Mar , 2021 20:58 pm
Forum: Cyclone
Topic: X axis zero return
Replies: 8
Views: 1674

Re: X axis zero return

Power up the control while holding in "P" & "CAN" on the keypad.
by Martin
Thu 11 Mar , 2021 20:56 pm
Forum: Novamill
Topic: Novamill communication issue
Replies: 10
Views: 1666

Re: Novamill communication issue

What machine have you selected in VR Milling?
by Martin
Tue 09 Mar , 2021 17:47 pm
Forum: Electronics
Topic: VMC 1300 Pro spindle won't turn
Replies: 7
Views: 3136

Re: VMC 1300 Pro spindle won't turn

Have you checked the Lock is correctly set?

If you look just behind the top of the guard at the Bernstein switch there is a circular disc with a arrow on that should point to the Lock (right as you look at it).
by Martin
Tue 09 Mar , 2021 14:32 pm
Forum: NovaTurn
Topic: NOVATURN TOOL CHANGE POSITION.
Replies: 4
Views: 1012

Re: NOVATURN TOOL CHANGE POSITION.

If you go to Setup then to Machine Parameters & enter the password denny you can change it in the Tool Changer box.