Search found 1897 matches
- Wed 19 Dec , 2007 20:48 pm
- Forum: Novamill
- Topic: novamill spindle speed
- Replies: 4
- Views: 9963
It sounds as if there is no Analogue voltage out of the Control card. If your machine is a standard Novamill the Control card will be mounted in the top left of the electrical box. The two wires to look at are connected in the bottom left corner of the card directly below the 9 way socket. (Twin wir...
- Fri 14 Dec , 2007 13:12 pm
- Forum: Orac
- Topic: Machine Identification
- Replies: 8
- Views: 6278
- Mon 10 Dec , 2007 15:00 pm
- Forum: Orac
- Topic: Machine Identification
- Replies: 8
- Views: 6278
- Mon 10 Dec , 2007 13:34 pm
- Forum: Orac
- Topic: Machine Identification
- Replies: 8
- Views: 6278
- Fri 07 Dec , 2007 20:09 pm
- Forum: VersaLaser
- Topic: Versalaser and Plywood
- Replies: 1
- Views: 4001
- Thu 06 Dec , 2007 15:26 pm
- Forum: VersaLaser
- Topic: VL3.5 50 watts cutting paper
- Replies: 18
- Views: 17529
- Wed 05 Dec , 2007 23:41 pm
- Forum: ZeroCentre/ZeroTurn/ZeroBore
- Topic: ZeroTurn 1008, 1017 alarms
- Replies: 56
- Views: 54470
- Wed 05 Dec , 2007 21:27 pm
- Forum: ZeroCentre/ZeroTurn/ZeroBore
- Topic: ZeroTurn 1008, 1017 alarms
- Replies: 56
- Views: 54470
- Wed 05 Dec , 2007 16:31 pm
- Forum: Novamill
- Topic: Novamill VR milling 5 (version 5.14). Offsets/homing probs
- Replies: 1
- Views: 2998
Are the drives powered up?
Try using the secret home button,
viewtopic.php?t=53&highlight=secret
It may be worth checking the fuse on the control card.
Try using the secret home button,
viewtopic.php?t=53&highlight=secret
It may be worth checking the fuse on the control card.
- Wed 05 Dec , 2007 14:33 pm
- Forum: ZeroCentre/ZeroTurn/ZeroBore
- Topic: ZeroTurn 1008, 1017 alarms
- Replies: 56
- Views: 54470
- Wed 05 Dec , 2007 8:04 am
- Forum: EasiMill / EasiTurn
- Topic: KEY SWITCH FOR EASIMILL 3
- Replies: 3
- Views: 4206
- Wed 05 Dec , 2007 7:58 am
- Forum: ZeroCentre/ZeroTurn/ZeroBore
- Topic: ZeroTurn 1008, 1017 alarms
- Replies: 56
- Views: 54470
- Thu 15 Nov , 2007 20:51 pm
- Forum: Mirac
- Topic: Mirac PC - help required with setting up
- Replies: 3
- Views: 4197
a. Will this Mirac only be capable of running the old DOS based Lathecam program? Lathecam is quite an old turning package. I think the current package is Quickcam Turning. It will run from most Cad/Cam turning applications. b. Is it able to be controlled with the VR Turning application or will it ...
- Thu 15 Nov , 2007 15:51 pm
- Forum: Router 2600
- Topic: Router 2600 pro Re:- Vacuum Pump
- Replies: 1
- Views: 3478
- Mon 12 Nov , 2007 17:44 pm
- Forum: Triac
- Topic: Mach3 running unmodified Triac!!!
- Replies: 45
- Views: 52991
- Mon 12 Nov , 2007 14:10 pm
- Forum: Cyclone
- Topic: Cyclone 6 station turret - Help
- Replies: 3
- Views: 4626
It may be worth looking at the toolpost clamp switch/input. If it is the RH80 toolpost you can get to the small micro switch by removing the circlip on the right hand side. This allows access to the clamp switch & the rotary switch. If it does not send the signal to the control then it wil not compl...
- Fri 09 Nov , 2007 16:38 pm
- Forum: Mirac
- Topic: Mirac PC - help required with setting up
- Replies: 3
- Views: 4197
You will be able to download the software from the denford web site. You will need a PC with 2 com ports.(serial). The desk top tutor plugs straight in to a com port with the 25 way ribbon cable you have. The grey lead is the machine RS232 Lead. One end plugs in to the side of the electrical box & t...
- Wed 07 Nov , 2007 21:14 pm
- Forum: Software
- Topic: DOS Lathe Software Errors
- Replies: 13
- Views: 12236
- Wed 07 Nov , 2007 20:59 pm
- Forum: Orac
- Topic: Orac tool changer problem
- Replies: 2
- Views: 3502
- Mon 05 Nov , 2007 12:58 pm
- Forum: Triac
- Topic: Home & Limit switches on 1988 Triac
- Replies: 2
- Views: 3158