Search found 1435 matches
- Mon 20 May , 2024 12:47 pm
- Forum: VMC 1300
- Topic: VMC 1300, adjustment procedure to eliminate play in toolholder collet/spindle/drawbar assembly
- Replies: 7
- Views: 5942
Re: VMC 1300, adjustment procedure to eliminate play in toolholder collet/spindle/drawbar assembly
Can you remove the pullstud from the tool that does not fit correcly and check that it fits to the taper correctly. You should then see it it fits correctly. The bottom of the drawbar should hit the top of the pullstud as you release the tool. This will help a tool release if stuck on the taper. Tig...
- Thu 16 May , 2024 13:44 pm
- Forum: Machines
- Topic: Turn 270M will not home in X
- Replies: 1
- Views: 44
Re: Turn 270M will not home in X
Hi, Do you have a manual toolpost or an 8 station turret?
When selecting the machine type the Turn270PRO should be selected if a turret and Turn270PROM if a manual tool post.
The machine type dictates the direction of travel when homing.
When selecting the machine type the Turn270PRO should be selected if a turret and Turn270PROM if a manual tool post.
The machine type dictates the direction of travel when homing.
- Thu 16 May , 2024 11:49 am
- Forum: QuickCAM / LaserCAM 2D Design
- Topic: Is it possible to trim lines?
- Replies: 3
- Views: 14324
Re: Is it possible to trim lines?
The trim feature is now standard in V2 of QuickCAM.
You still have to explode objects to be able to trim them.
You still have to explode objects to be able to trim them.
- Tue 14 May , 2024 13:39 pm
- Forum: VMC 1300
- Topic: VMC 1300, adjustment procedure to eliminate play in toolholder collet/spindle/drawbar assembly
- Replies: 7
- Views: 5942
Re: VMC 1300, adjustment procedure to eliminate play in toolholder collet/spindle/drawbar assembly
None of the springs should be flipped they should all be fitted oposing each other and the 10.5 should be standard for all.
- Tue 14 May , 2024 13:35 pm
- Forum: Software
- Topic: VR Milling V5 X axis in wrong direction
- Replies: 3
- Views: 118
Re: VR Milling V5 X axis in wrong direction
As martin says the files are produces in Quick Cam pro with the back of the car at the left and with the Rotary fixture you have the back of the car on the right. You have to add a mirror in X command to make it cut right to left with the origin on the RH end. If using Car Wizard you can output to t...
- Tue 14 May , 2024 13:29 pm
- Forum: Triac
- Topic: Using TRIAC with America voltage 110V 1ph, or 220V 2ph
- Replies: 2
- Views: 70
Re: Using TRIAC with America voltage 110V 1ph, or 220V 2ph
The machine was probably supplied with a seperate autotrancformer in a box. this would convert the 110V to 230 or 240V.
- Tue 14 May , 2024 9:20 am
- Forum: F1 / 4x4 / GT Racing In Schools
- Topic: Denford F1 Fixture Parts Description
- Replies: 2
- Views: 10440
Re: Denford F1 Fixture Parts Description
With the introduction of the F1 Model Block made of foam the bore of the billet was reduced to 18mm.
As a result the spiggot is now a smailler dimension
As a result the spiggot is now a smailler dimension
- Wed 27 Mar , 2024 8:05 am
- Forum: Denford Classifieds
- Topic: Denford Nextmove ST USB controller
- Replies: 2
- Views: 941
Re: Denford Nextmove ST USB controller
Using Easy Upgrader the card can be used for any machine and will update any machine running without a USB port.
Replacing a Denstep controller performance would be much improved.
.
Replacing a Denstep controller performance would be much improved.
.
- Wed 27 Mar , 2024 8:01 am
- Forum: Software
- Topic: Some software questions
- Replies: 1
- Views: 980
Re: Some software questions
Hi, The machine RS232 cable will be detIle on the forum. I would also check the EPROM version you have in the machine. If the EPROM is for DOS the software can be downloaded for free if the EPROM is for VR Turning you would have to purchase software from Denford. The serial cable for US machines is ...
- Wed 06 Dec , 2023 9:55 am
- Forum: Turn270
- Topic: Tapered thread ?
- Replies: 2
- Views: 9278
Re: Tapered thread ?
Hi,
The Turn270PRO will not cut does not have a command for taper thread cutting.
The spindle only runs in reverse.
The Turn270PRO will not cut does not have a command for taper thread cutting.
The spindle only runs in reverse.
- Mon 20 Nov , 2023 12:20 pm
- Forum: Triac
- Topic: spindle bearing coming loose
- Replies: 5
- Views: 8107
Re: spindle bearing coming loose
Just call Denford or email Sales@denford.co.uk
Locknut BI00186HH
The price has increased a bit but they are in stock
Locknut BI00186HH
The price has increased a bit but they are in stock
- Thu 09 Nov , 2023 18:19 pm
- Forum: StarMill
- Topic: Starmill Headstock Drawings
- Replies: 1
- Views: 6461
Re: Starmill Headstock Drawings
Headstock Drawing
- Wed 08 Nov , 2023 17:38 pm
- Forum: F1 / 4x4 / GT Racing In Schools
- Topic: Tether Pully Guide Assembly
- Replies: 0
- Views: 28103
Tether Pully Guide Assembly
This file can be downloaded to produce a pully system to tension the tether guide. pulley.jpg PULLEY BRACKET (9.1.18).stl The STL can be 3D Printed and one of the F1 in school axles can be used as a shaft for the pulley The pulleys can be purchased through Rapid Electronics https://www.rapidonline.c...
- Mon 23 Oct , 2023 13:52 pm
- Forum: MicroRouter
- Topic: Microrouter v5 ns pro usb
- Replies: 1
- Views: 5801
Re: Microrouter v5 ns pro usb
It sounds as if the machine does not have microstepping drives/
Post a picture of the electrical panel and the serial number plate.
Post a picture of the electrical panel and the serial number plate.
- Fri 13 Oct , 2023 12:16 pm
- Forum: QuickTURN 2D Design
- Topic: Including a centre drill hole in the design
- Replies: 1
- Views: 13917
Re: Including a centre drill hole in the design
The center drill has a 2mm tip but 5mm shank so to be used the hole must be drawn as 5mm.
If you set the depth to 2mm it will only use the start of the centre drill.
It would then use the 5mm drill to drill 2mm deep also unless you dissablesd it in the tool library.
If you set the depth to 2mm it will only use the start of the centre drill.
It would then use the 5mm drill to drill 2mm deep also unless you dissablesd it in the tool library.
- Mon 02 Oct , 2023 8:54 am
- Forum: User Stories / Projects / Courseware
- Topic: TOOL SETTING GAUGE FOR ROUTER
- Replies: 0
- Views: 29633
TOOL SETTING GAUGE FOR ROUTER
A usefull setting gauge for router tooling if not using the recommended tool holders.
Set tool one on the surface of the material with a Zero offset and other tools have an offset of either -20, -25mm or -30mm.
Set tool one on the surface of the material with a Zero offset and other tools have an offset of either -20, -25mm or -30mm.
- Tue 19 Sep , 2023 15:11 pm
- Forum: Micromill / Microturn
- Topic: Micromill Spindle Problem
- Replies: 2
- Views: 7475
Re: Micromill Spindle Problem
Hi, What spindle speed were you trying to run at? If the speed request was very slow it may not have enough grunt to start rotating. Set the speed to say 1500RPM with the override to 100% and see if there is any difference. It could also be an issue with the spindle analogue. The light dimming would...
- Mon 21 Aug , 2023 15:34 pm
- Forum: Cyclone
- Topic: BARRUFALDI TOE80,
- Replies: 11
- Views: 10258
Re: BARRUFALDI TOE80,
Denford manufacture thier own turret for the current machines which are not retrofitable onto the Cyclone.
- Fri 04 Aug , 2023 13:20 pm
- Forum: NovaTurn
- Topic: HELP CONNECTING VR TURNING TO NOVATURN NS
- Replies: 8
- Views: 9130
Re: HELP CONNECTING VR TURNING TO NOVATURN NS
Hi, The serial cable you are using does not look to be the correct one. It should be a Black Lindy cable and is not an off the shelf serial cable. The cable should be a BI01812GG https://www.denfordata.com/bb/viewtopic.php?f=54&t=765&p=23012&hilit=serial+rs232#p23012 https://www.denfordata.com/bb/vi...
- Tue 18 Jul , 2023 16:02 pm
- Forum: Electronics
- Topic: Which EPROM version in a DenStep card?
- Replies: 16
- Views: 31347
Re: Which EPROM version in a DenStep card?
Hi Max,
I dont think we have any Hex files now.
I dont think we have any Hex files now.