The upgrade rack card is Product Code - BI00434Y

I Hope these are the correct drawings

Loaded VR CIM and VR Robot on to a Windows 7 Home PC. It seems to install OK but when you try to open rooms you get an Access Viloation Error in VL-Link.exe. I suspect this is the VISCAPE graphic driver that is causing the problem. Admin may be able to give a more exact report.

11 indicates the bootloader is jumping to firmware. The firmware is not running properly so the Watchdog barks and the process starts again. The bootloader thinks there is firmware available so it suggests the firmware must be corrupted somehow. Have you tried downloading firmware again? (does your ...

Customer writes :-

The green LED stays permanently lit with the 7 segment display showing 11. This then resets and starts all over again. _ |_| |_|

Great job Rich.

Its a Denstep

These laminates can be cut with the CO2 laser. Thickness up to 3 or 4 mm should be no problem if you have at least 50 watts to work with.

Are you running in SINGLE STEP MODE ?

5th Button from the LHS on the bottom of the VR Milling 5 screen

Customer says ............... Orac has been relocated in a different room and now gets the following problems 1. The tool offsets do not seem to be remembered correctly, it will work fine once the offsets have been set, but on restarting the Orac the offsets are not correct 2. The spindle will only ...

The VR Software runs the machine. You have to provide a .FNC file that is compatible with the Denford software

No drawing packing in the software.

What do you mean when you say "White Tower ?"

The Serial No plate will be on the Black eletrical box

The VR Milling software Ver 2 / 5 is £250.00. for a single user licence + P&P + VAT

Note !!!
VR Milling software Ver 2 will run on PC's with up to Windows XP operating systems
VR Milling software Ver 5 will run on PC's with up to Windows 7 operating systems

viewtopic.php?t=663
viewtopic.php?f=6&t=215&hilit=+missing+tooling

You would need VR Milling ver 2 / 5 depending on its year of manufacture and electronics and a PC and monitor, again depending on its year of manufacture and electronics the PC would need a RS232 (Serial) Port or a USB port.

What letter or number does the 7 segment display on the drive board ?

He's not back yet.

Our designer is off work at the moment, so we will have to wait for his return to see what or if we can offer

Unfortunately we do not have this part