Hello
I have one for sale.

What does it say when you click on the details tab. I will upload th threading program Monday for you to try. May be the program is the problem. Hello Steve When I click on the details tab it does say "The spindle speed is probably too high for the axes to follow" I will be very grateful if you che...

What happens when you program 300 rpm and try and cut the thread? Does it just hang up in program or do you get a message on screen? If so can you post another photo showing the program and the message? How did you create the program? What package? Hello When I try program 300 rpm the machine stop ...

Steve wrote:What speed are you asking for in the program when threading?

I would suggest 300 to 400 RPM

I tried 300 and 400rpm .... it does not help.

Martin wrote:What's it like at top speed??

I set a maximum speed of 3700 rpm

Hello
I am adjusting inverter today and working ok. Spindle speed is precise but the threading still not working.
Please help.

Can you check that the machine displays the actual spindle speed & that it's close to the requested. Also line 25 show a spindle speed of S00. I am not a programmer so not sure if it's that. Hello I checked.... unfortunately the actual spindle speed is not close to the requestet. When I request 400...

Hello I have been trying machining small thread on my cyclone lathe.....Unfortunately it does not work. [BILLET X38 Z55 G99 G21 G40 G50 S3000 G96 S150 M3 M06 T0101 G00 X39 Z2 G01 X-1 F0.125 G00 X38 Z1 G71 U1.5 R0.5 G71 P1 Q2 U1 W0.1 F0.1225 N1 G00 X16 G1 Z0 F0.1 X20 Z-20 Z-35 G03 X30 Z-40 R5.0 G01 Z...

Hello
Dose anyone have got Baldor NextMove ST Hardware reference guide. Regards

Hello
Dose anyone have got Baldor NextMove ST Hardware reference guide. Regards

Hello is it possible connection spindle probe on Denford Triac PC whit USB control card?.... if so, how to connect, and where insert the macro. Regards

Hello

The problem still is not solved..... but I noticed if I click between the home buttons(hidden or secret home) then I can reduces feed speed from 500 to 60mm/min the axes working fine. It seems that feed speed are too high. How does it change??? Regards

Martin wrote:Can you home any Axis?

Not at all.

just to confirm there isn't an issue with the home switches, manually move each axis to a position a distance away from the switches and try to home each in turn. You could also try the 'hidden or secret' home. I've never used it but believe you need to click between the home buttons (best to searc...

I would say you have the wrong machine selected. It should be set as a Triac VME. You can change it in "Settings" Hello Thank you Martin to the quick response, but unfortunately I selected machine on Triac VME and I have still the same problem. If I try to testing a stepper axis under WorkBanch the...

Hello I bought Triack PC and from the beginning I had a problem communicate to the computer (control card has lost firmware). So I've done as you described to upgrade the card: https://www.denfordata.com/bb/viewtopic.php?f=54&t=5181&p=20500&hilit=nextmove+st#p20500 Now the communicate is OK I can co...

Hello
I have got control card NextMove ST from denford Triack and I'd like to mount the card to my cyclone E. Is this possible?

i think there are several threading g codes and the software gives the wrong one for the controller. Try editing the g code with the other threading g codes Hello All I know is my control board supports treading g code G92 and G76. Can you specify a sample threading program with use the G92 or G76....

Hi
Unfortunately does not work.....does it mean that the control cards does not support these g-code?

What can I do to make it work??

Hello
Thanks Martin...........but I can't make even smaller thread. How to updating the vr turnig to latest version? I have got only dongle ....is that enough?. Regards