This lathe is now sold. Please close or delete this ad as appropriate admin.

Many thanks

Dave.

I have a denford easiturn 3, bought it a year or so ago. Was in working order when I purchased it, However the z and x axis now won't activate from the control panel, I presume its due to it be being kept in my garage all the time and probably has damp in the control box. Comes with a few extra part...

I am trying to buy a 4 jaw independant chuck for my easiturn 3 to replace the 3 jaw self centering one thats fitted to it. I am trying to find out what type of system the easiturn 3 uses, I believe it's a camlock system using 3 pins of 14mm diameter with a shallow taper in the centre. I think it's a...

I am looking for a replacement plastic pump assembly for the coolant pump on my Easiturn 3. Its an MG electric AQ3E pump. I have contacted M G Electric, they no longer service the AQ3, they now supply the AQ4 assembly, they say the parts are not compatable with the AQ3. If anyone has a spare pump or...

Many thanks for the reply Martin.

Will give it a try and see if the pump is working.

Cheers

Dave

Hello folks. Am looking for some information on the automatic lubrication system fitted to the easiturn 3. I am unsure if the system is working on my macjine, I have worked out that there is a plunger fitted to the reservoir, I have pumped the plunger until the pressure has built up, after using the...

Hi Dave, You should be able to adjust the VDU on the KME MB12 board. If you remove the screws holding the control panel housing you should be able to slide it forward & remove it. The KME MB12 board has several pots on it. Horizontal Hold, Vertical Hold, Contrast, Focus, Bottom Line . There may be ...

Hello. Have just joined the forum today. I have purchased a 1984 Denford Easiturn 3 from a local machine shop, It has not been used for at least five years, it has been stored in a dry workshop the whole time, so i am told. Before i go any further i know little to nothing about CNC lathes, i have us...