VR Turning help file.

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
MAX THE MILLER
CNC Apprentice
CNC Apprentice
Posts: 97
Joined: Tue 23 Aug , 2011 18:25 pm
Hardware/Software: Denford Triac PC. VR Milling 5.51.0.616

VR Turning help file.

Post by MAX THE MILLER » Fri 26 Jun , 2020 11:55 am

Some of the pages in the help file dealing with G Codes supposedly show diagrams. However when I view these pages the diagrams don't appear. This applies to both Windows 7 and Windows 10 machines.

Is this a general problem or is it just me?

Thanks, Max.
Attachments
vrthelp.jpg
vrthelp.jpg (104.97 KiB) Viewed 361 times

TDIPower
CNC Guru
CNC Guru
Posts: 514
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: VR Turning help file.

Post by TDIPower » Sun 28 Jun , 2020 11:22 am

That took me a while to locate as it's not in the Help 'contents' file as such but in the CNC programming.

Mine shows the same I am on version 1.49.

Pete

MAX THE MILLER
CNC Apprentice
CNC Apprentice
Posts: 97
Joined: Tue 23 Aug , 2011 18:25 pm
Hardware/Software: Denford Triac PC. VR Milling 5.51.0.616

Re: VR Turning help file.

Post by MAX THE MILLER » Mon 29 Jun , 2020 21:47 pm

Thanks for that Pete.

It's not just me then! I'm at version 1.51. When I get a chance I'll try it on Windows XP.

Given that this software is used in educational establishments I'm surprised this hasn't been reported before.

Max.

TDIPower
CNC Guru
CNC Guru
Posts: 514
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: VR Turning help file.

Post by TDIPower » Tue 30 Jun , 2020 20:12 pm

Ive been working with Denford VR turning for about 20yrs in school and still haven't worked my way through the help. Its one of those things, you learn what you need to get a job done at that time, it's only when something comes along that needs more that you try and stay 1 step ahead.

Pete

Post Reply