Info Wanted on Triac 200

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Info Wanted on Triac 200

Post by andy_con » Mon 22 Sep , 2014 23:12 pm

does anyone know the motor denford put in these machines for 20000rpm?

Image

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Info Wanted on Triac 200

Post by Martin » Tue 23 Sep , 2014 0:08 am

It was a attachment we fitted to a normal head. If you look at the photograph you can see the red unit gear unit attached to the standard head.

andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Info Wanted on Triac 200

Post by andy_con » Tue 23 Sep , 2014 9:52 am

Interesting, thanks.

You dont have any of them attachments lying round in a back room somewhere do you? :-)

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Info Wanted on Triac 200

Post by Martin » Tue 23 Sep , 2014 14:14 pm

No, we must have ordered them as required.

andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Info Wanted on Triac 200

Post by andy_con » Tue 23 Sep , 2014 16:35 pm

ah well, no worries. thanks

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: Info Wanted on Triac 200

Post by angel-tech » Tue 23 Sep , 2014 21:37 pm

these speed multipliers come up on ebay every now and then Andy.

andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Info Wanted on Triac 200

Post by andy_con » Wed 24 Sep , 2014 17:20 pm

Do they have an official name?

Post Reply