Oiling system on early Triac?

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
neil_f
Posts: 12
Joined: Sun 23 Mar , 2014 23:26 pm
Hardware/Software: Triac

Oiling system on early Triac?

Post by neil_f » Tue 01 Apr , 2014 11:55 am

Does the early all-green Triac have an oiler built in (can't see one in any pics of it)? If not, how is it oiled?

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: Oiling system on early Triac?

Post by angel-tech » Tue 01 Apr , 2014 14:50 pm

inside the pillar usually

neil_f
Posts: 12
Joined: Sun 23 Mar , 2014 23:26 pm
Hardware/Software: Triac

Re: Oiling system on early Triac?

Post by neil_f » Tue 01 Apr , 2014 17:28 pm

angel-tech wrote:inside the pillar usually
Ah, OK, that would account for it. Thanks.

neil_f
Posts: 12
Joined: Sun 23 Mar , 2014 23:26 pm
Hardware/Software: Triac

Re: Oiling system on early Triac?

Post by neil_f » Tue 01 Apr , 2014 18:04 pm

angel-tech wrote:inside the pillar usually
I take it that means you'd need to have access to the rear of the column in order to fill the oiler?
Which in turn would make mounting the unit on a bench well nigh impossible.
I presume that's why they moved the oiler outside the column on later models.

Post Reply