Help Broken Belt on Triac
Moderators: Martin, Steve, Mr Magoo
-
- CNC Expert
- Posts: 188
- Joined: Fri 05 Oct , 2012 20:06 pm
- Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC
Help Broken Belt on Triac
Machine was doing its thing and the X stopped working.
took the stepper out and i have a broken belt, help!
how/where do i get a replacement from and how do i replace it?
took the stepper out and i have a broken belt, help!
how/where do i get a replacement from and how do i replace it?
-
- CNC Expert
- Posts: 188
- Joined: Fri 05 Oct , 2012 20:06 pm
- Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC
Re: Help Broken Belt on Triac
belt replaced
where is the Y servo? would it be located under the Z column?
where is the Y servo? would it be located under the Z column?
-
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: Help Broken Belt on Triac
yes it is, access is from the back.
-
- CNC Expert
- Posts: 188
- Joined: Fri 05 Oct , 2012 20:06 pm
- Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC
Re: Help Broken Belt on Triac
ah ok, is there a panel or something?
due to the limited space in my workshop i cant access the back of the machine to check, so just thought id make enquiries encase i get any issues
due to the limited space in my workshop i cant access the back of the machine to check, so just thought id make enquiries encase i get any issues
-
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: Help Broken Belt on Triac
it's at the base of the pillar.
-
- CNC Expert
- Posts: 188
- Joined: Fri 05 Oct , 2012 20:06 pm
- Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC
Re: Help Broken Belt on Triac
cool thanks, hopefully i wont need to move the machine but you never know
-
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: Help Broken Belt on Triac
if you intend to replace the y belt you'll need a fair bit of room as it's a little bit tight to get at it.
-
- CNC Expert
- Posts: 188
- Joined: Fri 05 Oct , 2012 20:06 pm
- Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC
Re: Help Broken Belt on Triac
no i only plan to replace it if it breaks, otherwise im leaving it alone.
should i even ask where the z belt is?
should i even ask where the z belt is?
-
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: Help Broken Belt on Triac
inside the pillar, if you take off the pillar top plate you'll see it.
-
- CNC Expert
- Posts: 188
- Joined: Fri 05 Oct , 2012 20:06 pm
- Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC
Re: Help Broken Belt on Triac
ok cool thanks