Problem finding CNC files - DOS software/Tutor keyboad

All info relating to the Denford StarTurn CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
darrylh
Posts: 22
Joined: Wed 30 Mar , 2011 8:47 am
Hardware/Software: Starturn

Problem finding CNC files - DOS software/Tutor keyboad

Post by darrylh » Thu 31 Mar , 2011 20:10 pm

Looking for some help please ref new (to me) Starturn CNC lathe. Using fanucmd software via tutor keyboard: menu system, jog, spindle, home, all working fine. I have set denford data command in autoexec to ref my cnc file directory. When loading a cnc file on the tutor I can see the directory and the file but when selecting a file, error "File not found" appears. Do files have to have a particular extension to be recognised, or what else is wrong here?

User avatar
Denford Admin
Site Admin
Posts: 3642
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Problem finding CNC files - DOS software/Tutor keyboad

Post by Denford Admin » Fri 01 Apr , 2011 9:24 am

Not sure if it's related but shouldn't you be using FanucLD ? (L for lathe as opposed to fanucMD - M for mill)

darrylh
Posts: 22
Joined: Wed 30 Mar , 2011 8:47 am
Hardware/Software: Starturn

Re: Problem finding CNC files - DOS software/Tutor keyboad

Post by darrylh » Mon 04 Apr , 2011 8:49 am

Thanks. Not sure if this will affect the problem I have, since jog and spindle work OK using this software, however using lathe rather than mill is the right thing to do!

I have 2 tutor keyboards: 1 fixed keyb; one with removable overlay..........am I right in thinking "LD" DOS software is for the overlay, and "L" for the earlier keyb???

User avatar
Denford Admin
Site Admin
Posts: 3642
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Problem finding CNC files - DOS software/Tutor keyboad

Post by Denford Admin » Mon 04 Apr , 2011 9:12 am

I've never really seen a definative answer on the different versions... :?
these should help:
viewtopic.php?f=9&t=856&hilit=fanucld
viewtopic.php?f=9&t=294&hilit=fanucld
viewtopic.php?f=9&t=740

Post Reply